The objective of the Technical Inspection is to ensure that vehicles moving safely, and complying with basic standards of environmental care in regard to noise pollution, fumes and gases. They must be submitted to an excellent maintenance and periodic review and conscious, and that their condition affects safety, fuel consumption and the possibility of environmental contamination.
To confirm that the vehicles are able to move under these assumptions, it should go once a year at a plant Technical Inspection (ITV). There, in a span of 15 minutes and with specific equipment, the vehicle is controlled in a comprehensive manner to receive, upon completion, enabling for a wafer transitar libremente durante un año. En caso de que en la inspección se detecte algún defecto, se entregará un informe con la descripción del mismo y con las indicaciones para la realización de las reparaciones necesarias.
En esta época del año, en donde los viajes se vuelven frecuentes por las vacaciones, nos permitimos arrimarle una sugerencia del Instituto de Seguridad y Educación Vial (ISEV), centro privado, dedicado a la investigación en las materias de tránsito, transporte, educación y seguridad vial, cuyo objetivo es llevar a cabo acciones de asesoramiento, asistencia técnica y prevención. Les ofrecemos diez claves para realizar una revisión comprehensive vehicle ISEV source quoted, under the proper synthesis carried out:
1-Tires: its duration is estimated between 30,000 and 50,000 miles. The minimum depth of picture is 1.6 mm, although, for safety, it should raise it to 2.5 mm. Check cold pressure: if inadequate, can burst the tire or mechanical damage.
2-Brakes: This is the second leading cause of accidents due to mechanical failure. Should maintain a continuous review of same, from pills to liquid brake pads and discs even.
3-Cushions: should review them periodically. Your life is in the 70,000 miles but can take considerably longer. The progressive deterioration is not easily detectable, but its good condition is essential for safety.
4-Direction: the slightest sign of problems, gaps, noise, hard to spin, vibration, etc., Go to the workshop. If you notice excessive wear on the side of the tires can be a worrying symptom.
5-Lighting: in addition to checking all lights work well, it should check that its beam is properly adjusted. Clean the headlights is another good measuring stick to see and be seen.
6-Battery: The battery failures are often a cause accidents. Should review the various components of it to detect any abnormalities.
7-Carburetion: A good set-up the carburetor includes spark plugs, injection pump and other items. Besides the implications for security, reduce fuel consumption and pollution.
8-Electrical and straps: control the timing belt. Electrical wiring should also be in good condition and avoid carrying out installations in places not.
9-Levels: All vehicle fluids need to be just right.
10-Wipers: do not let dirt to accumulate on glass or brushes. Replace them if they are in poor condition. Both the glass front, rear, and mirrors are found elements that threaten dirty good vision.
The global trend in terms of road awareness is becoming stronger. During December and January has the highest demand in the year of Technical Inspection Certificates as data from our plants in Chile and Argentina. The influx of motorists increased from 20 to 30 percent from previous months, because the drivers check their vehicles before they hit the road. The statistics also show that the days surrounding to changes in half, demand is growing almost 25 percent.
While the verification must be permanent, this increased activity is a good indication of the awareness of motorists in vehicle safety. Simple preventive measures directly affect the security of the vehicle, giving protection to the occupants, the environment and the environment. One example is the campaign that is conducting YOURLIFE TÜV Rheinland Chile, where they offer practical advice to check the vehicle.
In addition to technical vehicle check stations (ITV) worldwide, TÜV Rheinland Group offers a line inspection exclusively to fleets. Our internationally accredited technical training, so they are able to provide rapid and specific review of domestic and imported vehicles
0 comments:
Post a Comment